Electronic small screws are tiny, precise and high-volume, demanding strict process and quality control. From wire selection to packaging, every step affects dimensional stability, thread quality and appearance. This article follows the production flow to explain key processes and inspection methods, helping customers understand how consistency is achieved.
The real challenge is not single-piece machining but maintaining dimension, thread and appearance consistency in large batches—requiring standardized parameters and full-process inspection.
Common wires are low-carbon, medium-carbon, alloy and stainless steel, chosen for strength, corrosion resistance and formability. Incoming wire is checked for grade, diameter, hardness and surface state; scratches, scale or cracks hurt cold-heading quality.
Wire diameter must match the finished size—too far off causes incomplete head filling or out-of-tolerance shanks. Materials are batch-managed with certificates for traceability.
Cold heading is the main forming method: multi-station headers cut wire, shape, upset the head and preform the shank. Die precision, feed length and lubrication determine head size and concentricity; worn dies need timely repair or replacement.
Cold heading offers high material utilization, efficiency and continuous grain flow, stronger than machining. After forming, head diameter, head height and shank diameter are sampled within tolerance.
Threads are formed by flat or round dies—chipless, giving good strength and surface quality. Shank diameter is controlled before rolling; die gap and feed speed affect pitch diameter and thread completeness, with poor setup causing damaged or offset threads.
Micro threads need high precision—GO/NO-GO gauges verify threads, with micrometers for pitch diameter when needed. Self-tapping and self-drilling threads use dedicated profiles to ensure driving performance.
Heat treatment—quench and temper, carburizing and others—balances hardness and toughness by grade. High-strength parts need de-embrittlement after plating to control hydrogen risk.
Finishes include zinc, nickel, black oxide, Dacromet and passivation per corrosion and appearance needs. Thickness, adhesion and salt-spray performance are batch-checked; too thick hurts thread fit, too thin under-protects.
Optical sorters perform full inspection with multi-camera and lighting combinations, checking heads, shanks, threads and surface defects—rejecting out-of-tolerance, short, burred or mixed parts. Parameters are set per spec and re-mastered on changeover.
Beyond full inspection, sampling covers dimensions, threads, hardness and coating; key customers receive reports. Data ties to batches for traceable quality records.
Packaging follows rust-prevention and transport needs—rust bags, zip bags, tape reels and trays. Tape reels suit automatic feeders, with reel diameter and pitch customized to avoid jams.
Before shipment, spec, quantity, batch and labels are checked against the order. Batch supply delivers by customer consumption, reducing inventory pressure while keeping batch consistency.
Each product has process cards and inspection specs covering material, tooling, parameters and checks, followed at changeover. Sampling confirms dimensions, threads and assembly; sealed samples set the batch baseline.
Consistency comes from fixed parameters and first-article checks. Customer changes trigger re-evaluation of tooling and parameters—never a direct drawing edit that skews batches.